Product > 영문 일반콘크리트용 혼화제 > WINFLOW-SM50(high range water reducer)

WINFLOW-SM50 high range water reducer (Standard Type) KSF2560

WINFLOW-SM50/SR50/SF50, a non-chloride liquid type admixture based on PNS/Lignin system, improves the quality of concrete by reducing W/C ratio, and also gives good workability. Special retarding agent or accelerating agents within the product, controls setting time of concrete to prevent cracks due to high hydration heat or to facilitate cold weather concreting.

USAGE

l Ready mix concrete plant or Batch plant field

l Building, Civil and constructions, and ordinary structures

l Highway, Airstrip or Dam concreting

l Mass concrete (using fly ash or slag powder)

l Concrete secondary products

DOSAGE

l 0.3~0.7 wt% of total binder

l Air-entraining agent can be applicable if needed

l The dosage range is applicable to most concrete mixtures using typical concrete ingredients.

However, variations in job conditions and concrete materials, such as silica fume, may requires

dosages outside the recommended range.

ADVANTAGES

l Reduces unit weight of cement by high dispersing ability

l Improves workability of concrete

l Reduces aggregate segregation and bleeding

PROPERTIES

l Appearance : Dark brown liquid

l Specific gravity : 1.200±0.05 (20℃)

l pH : 7.0±3.0

Mixing Design

Class	Gravel Size(mm)	W/C(%)	S/A(%)	Unit weight (kg/㎥)
Class	Gravel Size(mm)	W/C(%)	S/A(%)	W	C	S	G	AD
PLAIN	25	65.0	48.0	195	300	873	953
WINFLOW-SF50	25	65.3	48.0	181	300	878	959	1.5

Test Results

Test Item	KSF2560	PLAIN	WINFLOW-SF50
Admixture dosage (%)	-	-	0.5
Air Content (%)	Plain+1.0	1.4	1.9
Slump(㎜)	80±10	85	85
Water Reduction (%)	4≤	-	7.2
Bleeding (%)	100≥	100	81.5
Setting Time (Hr : Min)	+30≥	0	-30
	0≥	0	-35
Compressive strength ratio (%)	125≤	100	133
	115≤	100	120
	110≤	100	117
Elongation (%)	120≥	-	104

※ Length change test : Water curing for 7 days (20±2℃) and moist curing for 6 months (Temperature 20±2℃, Humidity 60±5%)